Path: utzoo!attcan!uunet!lll-winken!ames!xanth!nic.MR.NET!csd4.milw.wisc.edu!leah!iea25
From: iea25@leah.Albany.Edu (Ivan E Auger)
Newsgroups: comp.protocols.nfs
Subject: PC NFS and Desqview V2.22, QEMM V4.23
Keywords: pc-nfs
Message-ID: <1450@leah.Albany.Edu>
Date: 18 Jan 89 23:00:08 GMT
Distribution: na
Organization: The University at Albany, Computer Services Center
Lines: 14

PC NFS's telnet program doesn't work the first time I called it from a desqview
window, the second time it works.  Sometimes, it can lock up the machine.
The same type of problems happen with FTP.  When I run telnet using desqviews's
protected mode, I find that telnet tries to write to memory locations outside
its address space, these locations correspond to the one of the drivers loaded
at boot time for PCNFS.  I have had no problems with using the PCNFS' virtual
drives on the sun server.

These problems don't happen at all when I use NCSA's telnet v2.2.  Has
anybody found this problem.  Is there a fix to it ?  My configuration is
a PS/2 model 80 with a 3COM 3c523 ethernet board.

Ivan E. Auger
iea25@leah.albany.edu or iea25@albny1vx.bitnet