Path: utzoo!attcan!uunet!lll-winken!ames!pasteur!ucbvax!MTSG.UBC.CA!Alan_Ballard
From: Alan_Ballard@MTSG.UBC.CA
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: Re: NCSA Telnet with WD8003A PS/2 card
Message-ID: <1391842@mtsg.ubc.ca>
Date: 10 Jan 89 18:46:14 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 17

> Is it possible that the "modification" referred to above, if not applied
> to my NCSA v2.2 package is why I'm not getting very far on a ps/2/50 with
> a WD8003ET/A card installed?  I'm not aware of mods to 2.2.
 
  
The distributed version of NCSA v2.2 does not support the 8003A. 
I modified the 8003 driver to produce an 8003A driver. 
This can be downloaded from  the anonymous FTP server at NCSA
(128.174.20.50) directory NCSA_Telnet\contributions. 
 
Alternatively, you can get an ARC file containing it via
anonymous FTP from mtsg.ubc.ca (128.189.103.1) 
file PC1:NCSAUBC.ARC 
 
So far I have had two people report problems with this, and have not heard
whether they were resolved.  It works fine here at UBC.  I'd like to
know if anybody else is using it successfully.