Path: utzoo!attcan!uunet!lll-winken!ames!ncar!boulder!sunybcs!rutgers!rochester!pt.cs.cmu.edu!cadre!pitt!cisunx!jlfox
From: jlfox@cisunx.UUCP (James L Fox)
Newsgroups: comp.protocols.tcp-ip.ibmpc
Subject: Re: NCSA Telnet with WD8003A PS/2 card
Summary: ncsa ps/2 mod
Message-ID: <14799@cisunx.UUCP>
Date: 9 Jan 89 20:56:56 GMT
References: <494*andchan@ccu.UManitoba.CA> <17800001@uicsrd.csrd.uiuc.edu>
Organization: Univ. of Pittsburgh, Comp & Info Sys
Lines: 14

In article <17800001@uicsrd.csrd.uiuc.edu>, kai@uicsrd.csrd.uiuc.edu writes:
> 
> > /* Written by andchan@ccu.umanitoba.ca */
> > I've tried out the modified NCSA Telnet and it basically work fine.  Thanks!
                       ^^^^^^^^
> > I do have a problem though.  When downloading a large file from a Sun 4
> > to the PC, the PC will take in the first few trunks and then hangs.
> 

Is it possible that the "modification" referred to above, if not applied
to my NCSA v2.2 package is why I'm not getting very far on a ps/2/50 with
a WD8003ET/A card installed?  I'm not aware of mods to 2.2.

Any insight would be appreciated.