Path: utzoo!utgpu!watmath!julian!braille!terry
From: terry@braille.UWO.CDN (terry cudney)
Newsgroups: comp.sys.amiga
Subject: Re: Which digitizer should I buy?
Message-ID: <322@braille.UWO.CDN>
Date: 13 Jan 89 02:50:32 GMT
Reply-To: terry@braille.uwo.ca (terry cudney)
Organization: Intelligent MicroWare
Lines: 23


     Is it possible to digitize single frames from an NTSC source like a VCR
or camcorder?
     I don't necessarily want to get successive frames from an animation,
just good quality single frames that could be manipulated with a paint
program like Photon Paint or DPaint, to be displayed as single frames
on the monitor, or printed on a printer.
     What hard/software is available for this sort of thing. I have only heard
of Digi-View and Live!. Are there others? with what features/capabilities?

     TO: Scott Henry
     Unable to reach your address I'm posting this with a note to you,
I would appreciate either email or a posted summary of whatever you get
on this subject.
     Thanks,
           Terry

/******************************************************************************
** UUCP:   terry@deepthot. {UWO.CA || UUCP}                                  **
** BITNET: cudney@UWOVAX.BITNET                                              **
** Post:   Terry Cudney  9 Durham Street, LONDON, Ontario, Canada  N5Y 2H9   **
******************************************************************************/
.