Path: utzoo!attcan!uunet!mcvax!enea!kth!draken!tut!pl
From: pl@etana.tut.fi (Pertti Lehtinen)
Newsgroups: comp.sys.amiga
Subject: Re: A501 clock failure
Message-ID: <5755@etana.tut.fi>
Date: 12 Jan 89 11:22:24 GMT
References: <628@atanasoff.cs.iastate.edu>
Sender: News@tut.fi
Lines: 16


	As many others I have also had problems with clock.

	On my A500 problem is that on boot when using rslclock,
	startup-sequence hangs when it tries to get date.

	date command shows as time: "(unset)(unset)(unset)".

	setting date manually lets startup to continue normally.
	and after setclock realtime clock appears to work.

	System is still WB1.2.
pl@tut.fi				! All opinions expressed above
Pertti Lehtinen				! are preliminary and
Tampere University of Technology	! in subject to change
Software Systems Laboratory		! without any further notice.