Path: utzoo!attcan!uunet!tektronix!percival!parsely!agora!billsey From: billsey@agora.UUCP (Bill Seymour) Newsgroups: comp.sys.amiga Subject: Re: S-VHS input/output to Amiga and monitor Message-ID: <1332@agora.UUCP> Date: 15 Jan 89 21:54:33 GMT References: <6601@louie.udel.EDU: Organization: Advanced Solutions, Hillsboro, OR Lines: 40 From article <6601@louie.udel.EDU:, by c072erh%utarlg.decnet@chpc.brc.utexas.edu (UTARLG::C072ERH): : I have purchased a S-VHS video recorder recently and I : would like to hook up the S-VHS output of the recorder to : my Amiga's monitor (a 1080). Redmond Cable (I'm afraid I don't have their number here) makes a cable for changing the SVHS Y-C connector to two RCA jacks. You might give information a call in Redmond Washington and ask for their number... : There is also a S-VHS input on the recorder that is a four : pin connector. I would like to be able to use this to : record from the video output of my Amiga(s) (I have both : an A1000 and a B2000). Does anyone know how this might be : accomplished? Crearive Microsystems makes a product called the 'VI-500' that encodes your RGB signal into a pretty clean Y-C signal. Most of the customers we have seem to be using it for just what you want to do. The VI-500 should be available at your local dealer, or through pretty much any of the mail order houses. You can also get them direct by calling (503) 691-2552 (New number..) : : Thanks, : Ray. : : \-----------------------------------------------------------/ : \ Ray Howard Bitnet: C072ERH@UTARLG / : \ #include