Path: utzoo!attcan!uunet!super!rminnich
From: rminnich@super.ORG (Ronald G Minnich)
Newsgroups: comp.sys.amiga
Subject: Re: IEEE-488 Question.
Message-ID: <5145@super.ORG>
Date: 20 Jan 89 15:50:49 GMT
References: <2030146@hpcilzb.HP.COM> <410@madnix.UUCP>
Sender: news@super.ORG
Reply-To: rminnich@metropolis.UUCP (Ronald G Minnich)
Organization: Supercomputing Research Center, Lanham, Md.
Lines: 12

In article <410@madnix.UUCP> aaron@madnix.UUCP (Aaron Avery) writes:
>I should mention that there is now a GPIB (a.k.a. HPIB; IEEE-488) interface
>available for the Amiga. ASDG produces a GPIB module for the Twin-X general-
>purpose I/O board.
If i remember right Black Box will sell you an HPIB<->serial
adapter in the $100-$200 range. This would work on any amiga; 
I was under the impression that Twin-X is for A2000 only?
Anyways, how much would a Twin-X->HPIB lashup cost?
I have a nice HPIB plotter which is totally useless as it has that
blasted HPIB bus (which is why i got it for free, since the former 
owner  had no use for that bus either ....)
ron