Path: utzoo!attcan!uunet!lll-winken!lll-ncis!helios.ee.lbl.gov!pasteur!ucbvax!WUVMD.BITNET!C70301RC
From: C70301RC@WUVMD.BITNET (Rob Caton)
Newsgroups: comp.sys.apple
Subject: HELP!!! (Modem Set-up)
Message-ID: <8901101112.aa21817@SMOKE.BRL.MIL>
Date: 10 Jan 89 15:30:20 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 36

I'm back...

Well, I sold my old modem and have borrowed my friend's Practical Peripherals
1200SA.  When I try to use it with Applelink it dials correctly but has
problems connecting.  I have called Apple and have changed the switches to
as follows:

sw1:  Support use of DTR
sw2:  Full word result codes
sw3:  Result code enabled
sw4:  Command echo off
sw5:  Auto answer enabled
sw6:  Support use of DCD
sw7:  Not used
sw8:  Enable commands
sw9:  Bell 103/212a
sw10: M/S Ratio - USA

It still didn't work!

Also, when I tried calling local BBS's with these settings or the default
settings, I would get garbage characters appearing when it prompts me for
action (usually these { ) and my input would be garbled.  It seems that
it is receiving OK, but it is not transmitting properly.  If anyone can
help me I would greatly appreciate it.  Thanx!

---------------------------------------------------------------------
|       Rob Caton          |BITNET:  C70301RC@WUVMD                 |
|--------------------------|APPLELINK:  RobCaton <==(How original:-)|
|(Area Under Construction) |COMPU$ERVE:  71450,754                  |
|====================================================================
| "ACK THIPPFFT"  _   /|   | Don't blame me;  |
|    --Bill        'O.O    | I voted for Bill |
|      the        =(___)=  | and Opus!!!      |
|      Cat           U     |                  |
-----------------------------------------------