Path: utzoo!attcan!uunet!husc6!bloom-beacon!gatech!rutgers!rochester!rocksanne!entire!kodak!pcid!gizzmo!lazlo!ccs
From: ccs@lazlo.UUCP (Clifford C. Skolnick)
Newsgroups: comp.sys.att
Subject: Re: UNIX-PC SLIP sources
Message-ID: <110@lazlo.UUCP>
Date: 7 Jan 89 16:09:39 GMT
References: <1157@sw1e.UUCP> <10823@s.ms.uky.edu>
Reply-To: ccs@lazlo.UUCP (Clifford C. Skolnick)
Organization: The Steam Tunnel, Henrietta, NY
Lines: 22

In article <10823@s.ms.uky.edu> david@ms.uky.edu (David Herron -- One of the vertebrae) writes:
>The place to get the KA9Q sources is over in the ftp directories
>on louie.udel.edu ..

I also have the source and a 3b1 executable availble for anonymous uucp
on lazlo.

>Now, I don't see how it could possibly work.  Someone said this code
>had been developed for BSD machines and doesn't currently run on SysV.
>This says to me that select()'s were used for polling I/O, since SysV
>doesn't have an equivalent facility.

The code contains two UNIX  I/O modules, one for BSD one for System V.
I only took a few hours of hacking to get this code running on my 3b1.
You should have no problem porting this code since it was written with
portability in mind.

-- 
Cliff Skolnick (ccs@lazlo)|  "You told me time makes it easy, but you never
Phone: (716) 427-8046     |   told me time stands still" - Gary Numan
TCP/IP: 44.68.0.195       | ...!rutgers!rochester!ritcv!ritcsh!sabin! lazlo!ccs
  ccs@lazlo.n1dph.ampr.org|                      \!kodak!pcid!gizzmo!/