Xref: utzoo comp.sys.att:5267 comp.unix.wizards:14235
Path: utzoo!attcan!uunet!lll-winken!ncis!helios.ee.lbl.gov!nosc!ucsd!sdcc6!sdcc7!muller
From: muller@sdcc7.ucsd.EDU (Keith Muller)
Newsgroups: comp.sys.att,comp.unix.wizards
Subject: Re: AT&T 630 terminal - software ??
Message-ID: <1154@sdcc7.ucsd.EDU>
Date: 19 Jan 89 18:44:41 GMT
References: <1762@edison.GE.COM> <163@flnexus.ATT.COM>
Organization: University of California, San Diego
Lines: 13

In article <163@flnexus.ATT.COM>, heff@flnexus.ATT.COM (Paul_Heffner) writes:
> The second serial port on the base controller for the 630 is for 
> a printer port, you cannot use it for a second host access. The
> SSI/EIA board is needed for this purpose. (The SSI port lets you
> hook it to a 6500 family controller for access to the Synchronous/IBM
> world.)

This is completely wrong. I am using the second port at this moment
for a second set of windows. The 630 base controller WITHOUT an optional
boards will support two different layers connections.

	Keith Muller
	University of California