Path: utzoo!attcan!uunet!lll-winken!ames!pacbell!att!occrsh!uokmax!srpenndo
From: srpenndo@uokmax.UUCP (Sean Richard Penndorf)
Newsgroups: comp.sys.mac.programmer
Subject: Text Drawing at speeds in excess of 1200baud
Summary: Help needed with DrawChar
Keywords: help, software, terminal, DrawChar, QuickDraw, ack
Message-ID: <2220@uokmax.UUCP>
Date: 13 Jan 89 16:02:51 GMT
Reply-To: srpenndo@uokmax.UUCP (Sean Richard Penndorf)
Organization: Ultimatum Software
Lines: 22


I am writing a terminal program in LSP, and in my development have found
that the DrawChar routine bogs down when you are connected at speeds
greater than 1200baud.  My ultimate goal is to be able to write to the
screen at 2400baud.

I have tried saving the font being used in a BitMap, then stamping it to
the screen with CopyBits.  I have also tried using DrawText, and the lower
level routine StdText (?).  So far, everything I have tried bogs down
at 2400baud.  

Does anyone out there in NetLand have any clues to what I can try?  Any
comments at all will be greatly appreciated.  Thanks in advance.

Sean
----

-- 
Sean 'Longstride' Penndorf
!texsun!uokmax!srpenndo                    .  .        .-----------
GEnie:  S.PENNDORF                         |  |        `---.
srpenndo@uokmax.UUCP                       `--'LTIMATUM----'OFTWARE