Path: utzoo!attcan!uunet!lll-winken!lll-lcc!ames!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: xilinx!kevin@uunet.uu.net (Kevin Kelleher)
Newsgroups: comp.sys.sun
Subject: Problems with lpr over serial lines
Message-ID: <8901091827.AA08831@xilinx.UUCP>
Date: 13 Jan 89 13:12:41 GMT
Sender: usenet@rice.edu
Organization: Sun-Spots
Lines: 15
Approved: Sun-Spots@rice.edu
Original-Date: Mon, 9 Jan 89 10:27:37 PST
X-Sun-Spots-Digest: Volume 7, Issue 101, message 5 of 19

I recently installed SunOS 4.0 and the 4.0.1 patches.  I have a printer
connected over a serial line and it now drops the last 2 to 10 lines of
the last printout in the queue.  I hooked a terminal up to the line and
get the same results, I have also tried different baud rates with no
effect.  Any ideas anyone?

My printcap entry for the printer is:

lp0|ulp|Hewlett-Packard LaserJet printer (portrait mode):\
	:rw:br#19200:fs=#06020:fc#0300:xs#040:tr=\f:lf=/var/adm/lpd-errs:\
	:pl=66:pw=80:lp=/dev/ttyh0:sd=/var/spool/lp0:

Kevin Kelleher,  Xilinx Inc., 2069 Hamilton Ave, San 
Jose CA 95125
UUCP: {uunet,pyramid,altos}!xilinx!kevin
MA-BELL: (408) 559-7778 x269