Path: utzoo!utgpu!attcan!uunet!lll-winken!ames!xanth!ukma!mailrus!cornell!uw-beaver!rice!sun-spots-request
From: gene@pisc2b.UUCP (6394)
Newsgroups: comp.sys.sun
Subject: Boot Hanging
Message-ID: <591@pisc2b.UUCP>
Date: 16 Jan 89 05:21:23 GMT
Sender: usenet@rice.edu
Organization: Sun-Spots
Lines: 14
Approved: Sun-Spots@rice.edu
Original-Date: 11 Jan 89 13:31:17 GMT
X-Sun-Spots-Digest: Volume 7, Issue 105, message 15 of 22

When booting my Sun 3/60 I get the following two lines:

	EEPROM boot device...sd(0,0,0)
	Load: sd(0,0,0)boot

At this point the system hangs, going no further.  I suspect corruption on
the disk.  Hardware seems to be good, passed all the checks, anyway.  Any
suggestions would be greatly appreciated.

Gene Pantalone (201 457 6294)

gene@pisc2b.UUCP (6394)
---or---
attmail!pantalone