Path: utzoo!attcan!uunet!lll-winken!ames!mailrus!bbn!apple!antonio
From: antonio@Apple.COM (Antonio Ordonez)
Newsgroups: comp.unix.aux
Subject: Re: Ethernets and AUX
Keywords: daemons
Message-ID: <23791@apple.Apple.COM>
Date: 12 Jan 89 01:46:51 GMT
References: <6904@june.cs.washington.edu> <6243@hoptoad.uucp>
Distribution: na
Organization: Apple Computer Inc, Cupertino, CA
Lines: 21

In article <6243@hoptoad.uucp> hugh@hoptoad.UUCP (Hugh Daniel) writes:
>
>  If your Apple ether card's little red lite is out, so is the
>card. 

This is not true, if you are using THIK ETHERNET and the jumper on the
card is set that way the led will not go on.

This is mentioned on page 14 of the "EtherTalk Interface Card Manual"
in the section "Passes checkinstall but won't work"

Hope this helps


----------------------------------------------------------------------------
#include <disclaimer.h> 	/*  I'll think of a better one later  */
Antonio Ordonez				 	      amdahl \
Technical Communications/Direct Response Center	  pyramid!sun - apple!antonio
Apple Computer, Inc. (408) 996-1010		      decwrl /
----------------------------------------------------------------------------