Path: utzoo!attcan!uunet!seismo!esosun!cogen!celerity!billd
From: billd@celerity.UUCP (Bill Davidson)
Newsgroups: comp.unix.microport
Subject: big 286 system
Message-ID: <237@celerity.UUCP>
Date: 17 Jan 89 02:39:31 GMT
Reply-To: billd@celerity.UUCP (Bill Davidson)
Organization: FPS Computing, San Diego CA
Lines: 13

We are currently using an 8Mhz 286 PC with an RLL disk, 6 port serial
card and 1/4" tape, all made by Bell Tech.  It is getting inadequate
for our needs and it's always been slightly flaky.  We would like
to upgrade to a 12 or 16 Mhz system with a minimum of 4Meg and around
200Meg of disk and still have a 6 port serial card and 1/4" tape.
We need to stay with System V/286 for development reasons.  I would
like to hear from people who have found good hardware combinations
that featured all of this.  I'd also be interested in ethernet
hardware/software.
	--Bill Davidson
-- 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
....!{ucsd|sdcsvax}!celerity!billd