Path: utzoo!attcan!uunet!munnari!otc!metro!pta!teti!nswitgould!fido
From: jon_hogan-doran@713.602@fidogate.fido (Jon Hogan-doran)
Newsgroups: comp.unix.xenix
Subject: Wangtek 60mb ....
Message-ID: <10238@nswitgould.OZ>
Date: 6 Jan 89 22:51:53 GMT
Sender: fido@nswitgould.OZ
Organization: A Fidonet node, gated through nswitgould.oz
Lines: 32

We have been using the Wangtek 60mb tape driver in a number of our practices
and have had absolutely no trouble at all with the ... We have had no
difficulty with them , either in inst{llling them in 286 or 386 - owall azV
are working fine ... Our standard configuration from them is :
  
  Type      3 (W)
  DMA       1 
  IRQ       5 (interrupt)
DMA ADDRSS  0338H  
  
This is the standard configuration for a wangtek on our 386 Wyses ...
                          

 
The interrupts , DMA , IRQ are easily configured using the jumpers on the
board which state clearly "IRQ" "DRQ" "DACK" (i thing "DRQ" was "DMA")
on the switched we had :
  
 1-7 down 8-10 up (or vice-versa) this was borad (???) 13080 (i'm not sure
of the other. 
  
 On another removing jumpers 9 and 5 make it a base adress of 0220H or 0200H
(i'm not sure which) ....

Hope this helps someone , but I repeat the 60mb runs absoultely fine on a
386 Wyse , and has been for almost a year now on one of them ...

see ya ....

[JON] hogan - Doran
--- Zeta
 * Origin: Zeta: Unix, Minix, Xenix support (02) 627-4177 (3:713/602)