Path: utzoo!attcan!uunet!mcvax!unido!fauern!faui44!faui45!mlelstv
From: mlelstv@faui45.informatik.uni-erlangen.de (Michael van Elst )
Newsgroups: comp.sys.amiga
Subject: Re: Bison problem
Keywords: memory exhausted
Message-ID: <818@faui10.informatik.uni-erlangen.de>
Date: 23 Jan 89 15:33:31 GMT
References: <1213@inria.UUCP>
Organization: IMMD IV, University of Erlangen, W-Germany
Lines: 13

rouaix@inria.UUCP (Francois Rouaix) writes:
>PS concerning SNOOP: I'm not sure, but I believe SNOOP does not use
>Preferences settings on the serial port. Is there any version that does ?

I have the source of Snoop like program. It uses kprintf from the
debug.lib to write to the serial port without dealing with the
serial.device.
You can easily change this to work with console output, or write it
to AUX:, or send a message to a log deamon (I did this one).

				Michael van Elst

E-mail: UUCP: ...uunet!unido!fauern!faui45!mlelstv