Checksum: 56714
Path: utzoo!utgpu!anakin
From: anakin@gpu.utcs.toronto.edu (Anakin Research)
Date: Wed, 25-Jan-89 05:23:05 EST
Message-ID: <1989Jan25.052305.13169@gpu.utcs.toronto.edu>
Organization: University of Toronto Computing Services
Newsgroups: comp.sys.amiga
Subject: Re: Memory boards and bus noise
References: <1430@petsd.UUCP>
Reply-To: anakin@gpu.utcs.UUCP (Anakin Research)

	I have found that the best termination is to terminate the 16 data
lines and the four control signals (*AS, *LDS, *UDS, & R/*W) with a 4.7K
resistor to 5V+ and a 1K resistor in series with a 1000 pf. ceramic cap
to ground. I was told this idea by the kind people at Microbotics. It
has greatly increased the reliability and the number of peripherals
on the bus.
			Brad Fowles