Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!bloom-beacon!mit-eddie!uw-beaver!cornell!rochester!pt.cs.cmu.edu!andrew.cmu.edu!wn0e+
From: wn0e+@andrew.cmu.edu (William Nichols)
Newsgroups: comp.sys.amiga
Subject: Re:Memory boards and bus noise
Message-ID: <cXt-9gy00Vo848QEwt@andrew.cmu.edu>
Date: 30 Jan 89 17:59:08 GMT
Organization: Carnegie Mellon, Pittsburgh, PA
Lines: 14

Brad Fowles writes
>I have found that the best termination is to terminate teh 16 data lines and
the four control >signals(*AS,*LDS,*UDS,&R/**W) with a 4.7K resistor to 5V+ and
a 1K resistor in series with a >1000 pf ceramic cap to ground.

I have also had some problems with bus noise, and would like to try the
terminator, but I do not know which lines on the bus those 20 lines correspond
to.  Can anybody help me out?

Thanks in advance.

WRN
Dept. of Physics
Carnegie Mellon University