Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ukma!gatech!gtss!chas From: chas@gtss.gatech.edu (Charles Cleveland) Newsgroups: comp.sys.amiga Subject: Re: Kickstart Eliminator/ Inboard1000 or Insider conflict? Message-ID: <324@gtss.gatech.edu> Date: 1 Feb 89 14:52:32 GMT References: <7687@louie.udel.EDU> Reply-To: chas@gtss.UUCP (Charles Cleveland) Organization: Georgia Tech School of Physics Lines: 33 In article <7687@louie.udel.EDU> STODDARD%MORDOR@draper.com (Ike Stoddard, x3882, rm4421C) writes: ) ) EXPERIENCE WANTED: ) ) I am hoping to buy some more MB soon. I have a 1985 A1000, with ) the Kickstart Eliminator board installed. I am considering an ) Inboard1000 from Spirit, or an Insider from Michigan Software (if ) they're still around). Does anyone have any experience with this ) combo? I'm ready to rework the shielding and case to accommodate ) them if necessary. ) ) Please e-mail me your reply, as we may be losing our news feed shortly. ) Ike Stoddard )CSNET: STODDARD%MORDOR@DRAPER.COM )BITNET/UUCP: STODDARD%MORDOR@DRAPER.COM@RELAY.CS.NET I have an Insider and am interested in a hard disk, which some of which I have heard the former has problems. So in your responses to Ike, the summary of which I would indeed like to see, please think to mention any incompatibilities, or lack of them, of these boards with other peripherals. If you inadvertently reply to this article instead of Ike's, I will forward it to him. If he loses his news feed before he can get the summary out, I will happily post it for him. My Insider works fine, by the way, on my otherwise entirely generic, non- half-brite, Amiga 1000, where it is installed at C00000 (+/- a zero). The instructions were clear and I had no trouble following them. -- - It is better for civilization to be going down the drain than to be - - coming up it. -- Henry Allen - Charles Cleveland Georgia Tech School of Physics Atlanta, GA 30332-0430 UUCP: ...!gatech!gtss!chas INTERNET: chas@gtss.gatech.edu