Path: utzoo!utgpu!utstat!jarvis.csri.toronto.edu!mailrus!nrl-cmf!ames!amdcad!sun!pitstop!sundc!seismo!uunet!mcvax!enea!tope
From: tope@enea.se (Tommy Petersson)
Newsgroups: comp.sys.amiga
Subject: Re: amiga 2500UX
Message-ID: <4288@enea.se>
Date: 31 Jan 89 15:39:31 GMT
References: <5804@cbmvax.UUCP> <5827@cbmvax.UUCP> <14054@cup.portal.com> <5852@cbmvax.UUCP>
Reply-To: tope@enea.se (Tommy Petersson)
Organization: ENEA DATA AB, Sweden
Lines: 21
UUCP-Path: uunet!enea!tope

In article <5852@cbmvax.UUCP> jesup@cbmvax.UUCP (Randell Jesup) writes:
:In article <14054@cup.portal.com> Bruce_Eric_Bowers@cup.portal.com writes:
:>In article <5827@cbmvax.UUCP>, daveh@cbmvax.UUCP (Dave Haynie) says:
:>>                              No matter the preset, holding down both
:>>mouse buttons at boot time will get you a menu that lets you select the
:>>Amiga OS controlled by either the 68020 or the 68000, or UNIX if you have
:>>it on your hard disk.
:>
:>Is this true of any 2500? Does the 68000 still run at 7 MHz?
:
:	A2500's are based on the A2620 board.  All have the boot on 68000
:feature, and the 68000 runs at 7.?? Mhz, as usual.  When you boot on the
:68000, you lose the memory on the '020 card (the whole board is turned off.)
:
:-- 
:Randell Jesup, Commodore Engineering {uunet|rutgers|allegra}!cbmvax!jesup

Excuse me, it's not the first time I ask, but I have not gotten any answer:
What's the price of the A2620 board? Of the UX variant with 4MB?

Commodore Sweden won't even say the A2620 exists...