Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!eecae!netnews.upenn.edu!rutgers!tut.cis.ohio-state.edu!osu-cis!att!occrsh!uokmax!cbdougla
From: cbdougla@uokmax.UUCP (Collin Broadrick Douglas)
Newsgroups: comp.sys.apple
Subject: Re: 5 1/4" drive chaining
Message-ID: <2302@uokmax.UUCP>
Date: 1 Feb 89 03:50:34 GMT
References: <8901301500.AA09013@mitre.arpa>
Reply-To: cbdougla@uokmax.UUCP (Collin Broadrick Douglas)
Organization: University of Oklahoma, Norman, OK
Lines: 5


   Yes, you really can hook up your 5.25 inch drive to the daisy chain with the proper connector.  It will be recognized as slot 6 drive 1 just like normal but, you guessed it, slot sic can't be set to "your card".  I'm pretty sure that a couple of cards with still work in slot 6 though (like the Transwarp GS or Ramfactor) but I wouldn't try using a super serial card in that slot.

					Collin