Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!unmvax!pprg.unm.edu!hc!lanl!cmcl2!phri!marob!samperi
From: samperi@marob.MASA.COM (Dominick Samperi)
Newsgroups: comp.sys.att
Subject: Re: 3B2 Floppy Drive
Message-ID: <486@marob.MASA.COM>
Date: 27 Jan 89 17:00:56 GMT
References: <581@mccc.UUCP>
Reply-To: samperi@marob.masa.com (Dominick Samperi)
Organization: ESCC  New York City
Lines: 14

In article <581@mccc.UUCP> pjh@mccc.UUCP (Pete Holsberg) writes:
>Is /dev/rdiskette on a 3B2/400 a 720K device, a 1.4M device, or a 1.2M device?

None of the above! It doesn't use the last cylinder to store data, so it is
a 711K device. 80 cylinders are formatted though, and I could only get it to
work with standard DD diskettes (no HD diskettes). A product will be announced
in comp.newprod soon that will read/write cpio (or tar) format archives under
MSDOS, using an AT-type 1.2Meg drive, so that the archive (possibly spanning
multiple floppies) is compatible with the 3B2's floppy drive/controller/format.
(This is only one of many features of this product, tentatively named STAR.)
-- 
Dominick Samperi -- ESCC
samperi@acf8.nyu.edu
uunet!hombre!samperi