Path: utzoo!utgpu!watmath!isishq!f171.n221.z1.FIDONET.ORG!izot
From: izot@f171.n221.z1.FIDONET.ORG (Geoffrey Welsh)
Newsgroups: comp.sys.cbm
Subject: Re: Parallel transfer from IBM to C64
Message-ID: <1348.23DEB74C@isishq.FIDONET.ORG>
Date: 26 Jan 89 03:58:21 GMT
Sender: ufgate@isishq.FIDONET.ORG (newsout1.25)
Organization: FidoNet node 1:221/171 - Izot's Swamp, Kitchener ON
Lines: 30


 > I'd heard of that.  However, a friend of mine hooked up his C128 to
 > his PClone and ran CS-DOS on the 128.  He was able to do 9600bps
 > transfers with no hardware mods.  (Nice!)
 
   Joe: The CS-DOS RS-232 drivers are the exact same ones that you a few 
messages back said were capable of "2400, not much more". With the exception 
that it is running on a 2 MHz machine, Chris Smeets' drivers are copied almost 
byte for byte from my FASTERM.
 
   PaperClip III/64 should be able to XMODEM at 3600 or perhaps even 4800 bps. 
Steve's code differs slightly from mine, but I haven't spent the time looking 
at it closely.
 
===========================================================================
Internet:  Geoffrey.Welsh@f171.n221.z1.fidonet.org | 66 Mooregate Crescent
Usenet:    watmath!isishq!izot                     | Suite 602
FidoNet:   Geoffrey Welsh on 1:221/171             | Kitchener, Ontario
PunterNet: 7/Geoffrey Welsh                        | N2M 5E6 CANADA
BBS:       (519) 742-8939 24h 7d 300/1200/2400bps  | (519) 741-9553
===========================================================================
|  "I don't need a disclaimer. No one pays any attention to what I say."  |
===========================================================================
 


--  
 Geoffrey Welsh - via FidoNet node 1:221/162
     UUCP: ...!watmath!isishq!171!izot
 Internet: izot@f171.n221.z1.FIDONET.ORG