Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!purdue!bu-cs!encore!pinocchio!corbin
From: corbin@pinocchio.Encore.COM (Steve Corbin)
Newsgroups: comp.sys.ibm.pc
Subject: Re: VGA questions
Message-ID: <4820@xenna.Encore.COM>
Date: 31 Jan 89 23:44:45 GMT
References: <45900198@uxe.cso.uiuc.edu>
Sender: news@Encore.COM
Reply-To: corbin@pinocchio.UUCP (Steve Corbin)
Organization: Encore Computer Corp, Marlboro, MA
Lines: 22


 In article <45900198@uxe.cso.uiuc.edu> mcdonald@uxe.cso.uiuc.edu writes:
 >
 >>And I think
 >>that the Nec Multisync II has about 640 lines of resolution (vertical) and not
 >>the 560 that you mentioned (I may be very wrong though.)
 >
 >The specs say 560 vertical. But it works fine vertically in 600x800
 >mode. But the horizontal width is too narrow by about one inch.

Hmmmm.  I have a NEC Multisync II and it doesn't do 560 lines.  The top 40
lines in 800x600 mode are chopped off.  I have no problems with the horizontal
resolution.

The NEC Multisync 2 A will do 600 lines according to NEC's advertisements.
Apparently the 2 A just came out and I bought the II a few months ago.  I
wish I had waited.



Stephen Corbin	    UUCP:	{bu-cs,decvax,necntc,talcott}!encore!corbin
		    Internet:	corbin@multimax.ARPA