Path: utzoo!attcan!uunet!husc6!rutgers!aramis.rutgers.edu!athos.rutgers.edu!marsella
From: marsella@athos.rutgers.edu (Stacy Marsella)
Newsgroups: comp.sys.mac
Subject: memory expansion on newer SEs
Message-ID: <Jan.22.17.22.52.1989.3986@athos.rutgers.edu>
Date: 22 Jan 89 22:22:53 GMT
Organization: Rutgers Univ., New Brunswick, N.J.
Lines: 16



 Help.

I was just about to upgrade another SE from 1 meg to 2.5 meg using
some 1 meg simms. To my surprise Apple has revised the motherboard.
There are no longer two resistor locations labelled "256k" and "one
row". Now there is a 3 pin header with a shorting block. The two
locations are labelled "1 meg" and "2/4 meg". Assuming it is possible,
how do I position the shorting block to allow a 2.5 meg configuration?
(that is 1 meg simms in the "first" row and 256ks in the second row.)


Stacy

marsella@aramis.rutgers.edu