Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ukma!husc6!rice!sun-spots-request
From: smiddy@spam.istc.sri.com (Richard Smith)
Newsgroups: comp.sys.sun
Subject: Re: problem on 386i w/ laserwriter II
Message-ID: <8901252315.AA22258@rascal0>
Date: 2 Feb 89 08:17:53 GMT
Sender: usenet@rice.edu
Organization: Sun-Spots
Lines: 23
Approved: Sun-Spots@rice.edu
Original-Date: Wed, 25 Jan 89 15:15:20 PST
X-Sun-Spots-Digest: Volume 7, Issue 133, message 10 of 13

Hi Jeff,

For one thing, you could try specifying the baud rate of the port in your
printcap entry. Also, check out the "fc", "fs", "xc", and "xs" fields in
/etc/printcap. I suspect you will have to muck about with some of these
even if you get Transcript from Adobe. Our printcap entry looks like this:

lw|ps|postscript|PostScript:\
        :lp=/dev/lw:\
        :br#9600:rw:fc#0000374:fs#0000003:xc#0:xs#0040040:mx#0:sf:sb:\
        :if=/usr/local/lib/lw/psif:\
        :of=/usr/local/lib/lw/psof:\
        :gf=/usr/local/lib/lw/psgf:\
        :tf=/usr/local/lib/lw/pstf:\
        :nf=/usr/local/lib/lw/psnf:\
        :vf=/usr/local/lib/lw/psvf:\
        :sd=/usr/spool/lw:\
        :af=/usr/adm/lw.acct:\
        :lf=/usr/spool/lw/lw-log:

Thanks,
Richard Smith
Smiddy@spam.istc.sri.com