Newsgroups: comp.unix.aux
Path: utzoo!utgpu!jarvis.csri.toronto.edu!snow.white.toronto.edu!price
From: price@white.toronto.edu (Blaine Price)
Subject: Re: Partitions in AUX
Message-ID: <89Jan25.202155est.15529@snow.white.toronto.edu>
Keywords: Creating partitions 
Reply-To: price@white.toronto.edu (Blaine Price)
Organization: University of Toronto, CSRI
References: <8901252249.AA06324@explorer.dgp.toronto.edu>
Date: Wed, 25 Jan 89 20:21:48 EST

In article <8901252249.AA06324@explorer.dgp.toronto.edu> dgplab@dgp.toronto.edu (George Drettakis) writes:
>I have a MacII running AUX and a new 20 MB SCSI disk that has 4 partitions on it.
>I used dp (1M) to change the parition (DPM Index 3) type to Unix File System, 
>and apparently the whole disk is called /dev/dsk/c1d0s31. 
>What I cant understand is how the "slice" number relates to the DPM parition 
>index so that one can get mkfs to work and subsequently mount the file system. 
>Am I missing something essential ?

Missing something?  Do you have the installation guide?  If so, look 
on Page 70 (Ch. 8: Where to Go From Here, Section 6), where it says
"use the pname utility to associate these partitions with A/UX device nodes."  

In your case, do a pname -af -c1 -s3 "partitionName" and /dev/dsk/c1d0s3 
becomes associated with partition "partitionName" after which you can
run mkfs on /dev/dsk/c1d0s3 and then mount it.  What could be simpler? B-)
-- 
Blaine Price  (416) 978-5182 (lab-7140)  price@white.UToronto.{CA,Bitnet}  
Dept. of Computer Science    (fax-4765)           price@white.toronto.edu
Univ. of Toronto, Canada M5S 1A4            uunet!white.toronto.edu!price
 "If it can't be expressed in figures it is not science, it is opinion."