Path: utzoo!attcan!uunet!husc6!bloom-beacon!apple!amdahl!pacbell!hoptoad!peora!rtmvax!bilver!bill
From: bill@bilver.UUCP (bill vermillion)
Newsgroups: comp.unix.xenix
Subject: Re: ESDI Disk Drive for IBM PS/2-80 and SCO Xenix
Message-ID: <387@bilver.UUCP>
Date: 21 Jan 89 15:18:17 GMT
References: <921@wasatch.UUCP>
Reply-To: bill@bilver.UUCP (bill vermillion)
Organization: W. J. Vermillion, Winter Park, FL
Lines: 39

In article <921@wasatch.UUCP> kessler%cons.utah.edu@wasatch.UUCP (Robert R. Kessler) writes:
>
>
>After reading recent postings, it seems that the ESDI drives have the
>best performance characteristics for our requirements on our PS/2-80
>SCO Xenix system.  So, the obvious question, is what controller
>manufacturers and drives have you netlanders had success with?

Unless you have the model 80 with the 40 meg drive you already have an ESDI
controller in it.  The 80-71, 80-111, 80-311 have 70, 115 and 315 meg drives
in them.  The latter two are 20 mhz machines.  The 80-71 is 16mhz.  The 70-41
(??) the one with the 40 meg drive is not ESDI.  If that is the one you have
you are going to have to go to IBM for the controller I suspect.  No reason
for add-on controllers on machines that have them as standard - since there is
no floppy 80 listed.

You can support up to two ESDI's in the box.  I think (THINK!) there is a
limitation on how large they can be with SCO.  That probably will change.  I
currently have the 70-111.  When I need another drive it will be the 300.
Magazine reviews testing the 80 have plugged in many mfrs ESDI drives with no
problems.






  It
>seems that everyone always runs out of disk space, so we are
>interested in as large a disk drive as we can get.  Like 150M or 300M.
>
>Thanks for any input you may have.
>
>Bob.


-- 
Bill Vermillion - UUCP: {uiucuxc,hoptoad,petsd}!peora!rtmvax!bilver!bill
                      : bill@bilver.UUCP