Xref: utzoo comp.unix.xenix:4666 comp.unix.wizards:14364
Path: utzoo!attcan!uunet!ispi!jbayer
From: jbayer@ispi.UUCP (Jonathan Bayer)
Newsgroups: comp.unix.xenix,comp.unix.wizards
Subject: Re: problems with Telebit and dialTBIT.c
Keywords: xenix386 Trailblazer-Plus_model_T2000
Message-ID: <428@ispi.UUCP>
Date: 27 Jan 89 14:12:15 GMT
References: <5367@turnkey.TCC.COM>
Reply-To: jbayer@ispi.UUCP (Jonathan Bayer)
Organization: Intelligent Software Products, Inc.
Lines: 37

In article <5367@turnkey.TCC.COM> sandy@turnkey.TCC.COM (Sanford 'Sandy' Zelkovitz) writes:
>I am still having problems with the Telebit modem running under SCO Xenix
>386 version 2.3.1! Here are the changes that I made:
>

I am running a trailblazer+ on the same type of system.  I have the
following settings:

	I use the standard gettydefs entry A

	the Devices entry is:

		ACU tty2D - 9600-19200 dialTBIT \D

	
You definitely need the flow control.  Yes it works, although I did get
the flow control patch from SCO.  The patch # is  xnx105, RTS/CTS
handshaking supplement.

		I always use configuration A.

		I set the modem to its default state by using

		ATZ
		AT&W

	I ran /usr/lib/dialTBIT -z /dev/tty2a 19200.


Hope this helps.

JB
-- 
Jonathan Bayer			      Beware: The light at the end of the
Intelligent Software Products, Inc.	      tunnel may be an oncoming dragon
19 Virginia Ave.				...uunet!ispi!jbayer
Rockville Centre, NY 11570  (516) 766-2867    jbayer@ispi