Xref: utzoo comp.unix.xenix:4724 comp.unix.wizards:14427
Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!unmvax!pprg.unm.edu!hc!ames!oliveb!felix!ccicpg!turnkey!sandy
From: sandy@turnkey.TCC.COM (Sanford 'Sandy' Zelkovitz)
Newsgroups: comp.unix.xenix,comp.unix.wizards
Subject: Xenix386 & Telebit-Plus
Keywords: Xenix_386_version_2.3.1 Telebit-Trailblazer-Plus
Message-ID: <5455@turnkey.TCC.COM>
Date: 30 Jan 89 04:59:27 GMT
Organization: Turnkey Computer Consultants, Costa Mesa, Ca.
Lines: 16

I finally found out why the Telebit wasn't running under RTS/CTS Flow
Control! It turns out that it wasn't the modem. It is either the driver
for the standard comm ports or my cable going to the modem. When I hooked
the modem up to the Smart Multi-port card, all works as advertised!

I would like to thank everyone that sent me mail about this problem and I
would as like to mention to others that are having similar problems, try a
different comm port or cable. 

Sandy

-- 
Sanford <sandy> Zelkovitz               XBBS   714-898-8634
UUCP: ....att!hermix!alphacm!sandy      ....trwrb!ucla-an!alphacm!sandy
      ....uunet!turnkey!alphacm!sandy   ....ucbvax!ucivax!icnvax!alphacm!sandy
DATA: 714-898-8634                      VOICE: 714-894-7898