Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!nrl-cmf!ames!amdcad!sun!pitstop!sundc!seismo!uunet!ispi!jbayer
From: jbayer@ispi.UUCP (Jonathan Bayer)
Newsgroups: comp.unix.xenix
Subject: Re: RTS/CTS flow-control problem with Xenix386 2.3.1 & ArNet Multiport
Message-ID: <435@ispi.UUCP>
Date: 2 Feb 89 00:48:32 GMT
References: <13344@duke.cs.duke.edu>
Reply-To: jbayer@ispi.UUCP (Jonathan Bayer)
Organization: Intelligent Software Products, Inc.
Lines: 20

In article <13344@duke.cs.duke.edu> gm@romeo.cs.duke.edu (Greg McGary) writes:
>A friend who doesn't have USENET access is having problems getting
>RTS/CTS flow control working with Xenix386 2.3.1 and an ArNet Multiport
>board.  He's put a break-out box on the line and sees that the


Have your friend call SCOand request the

	RTS/CTS/Handshaking Supplement

It is SLS #xnx105.

It corrects problems using RTS/CTS handshaking.

JB
-- 
Jonathan Bayer			      Beware: The light at the end of the
Intelligent Software Products, Inc.	      tunnel may be an oncoming dragon
19 Virginia Ave.				...uunet!ispi!jbayer
Rockville Centre, NY 11570  (516) 766-2867    jbayer@ispi