Xref: utzoo comp.unix.xenix:4916 comp.dcom.lans:2376
Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!elroy!cit-vax!citron
From: citron@cit-vax.Caltech.Edu (Mark C. Citron)
Newsgroups: comp.unix.xenix,comp.dcom.lans
Subject: Xenix to Novell - What board to use?
Message-ID: <9484@cit-vax.Caltech.Edu>
Date: 10 Feb 89 00:48:26 GMT
Reply-To: citron@cit-vax.UUCP (Mark C. Citron)
Organization: California Institute of Technology
Lines: 16

We are trying to connect SCO Xenix to a Novell network
using tcp/ip. What I need to know is what board to put into
my 386 box running Xenix. The Micon gateway was recommended by
Oracle (whose database we will be using) but there seemed to
be some question as to whether this card will work with all the
niceties that go with tcp/ip such as ftp, telnet, rlogin, etc.
I assume we will be running SCO's tcp/ip but that does not have to be
the case.

Any suggestions would be greatly appreciated
In addition, suggestions for what would be appropriate for the Novell end would
also be welcome.
Thanks
Mark Citron
citron@csvax.caltech.edu
citron@cit-vax.caltech.UUCP