Xref: utzoo comp.sys.ibm.pc:24127 comp.periphs:1509
Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ukma!xanth!lll-winken!uunet!wucs1!wuphys!marty
From: marty@wuphys.UUCP (Marty Olevitch)
Newsgroups: comp.sys.ibm.pc,comp.periphs
Subject: SCSI programming info needed
Keywords: SCSI, exabyte
Message-ID: <620@wuphys.UUCP>
Date: 2 Feb 89 17:02:54 GMT
Organization: Washington U Physics, St. Louis
Lines: 16

Does anyone know of any good books or articles that explain how to program a
SCSI interface?  I have to write some software to control an Exabyte
EXB-8200 8mm tape drive with a Rancho Technologies RT10-XT SCSI adapter on a
PC. Unfortunately, I can't use the rom bios calls that they supply because
this application will be running without DOS (it is a balloon-borne cosmic
ray data acquisition program stored in rom with no disk, terminal, or
keyboard), so I will have to program the SCSI myself. The documentation that
I already have is hard to understand, which is the reason for my request.

Please reply by e-mail. If anyone else is interested, I can summarize for
the net or send individual replies. Thanks very much.

Marty Olevitch				Internet: marty@wuphys.wustl.edu
Washington University			UUCP:     uunet!wucs1!wuphys!marty
Physics Department, Campus Box 1105	Bitnet:   marty@wuphys.WUSTL
St Louis MO 63130 USA			Tel:      (314) 889-6285