Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ncar!noao!arizona!naucse!wew
From: wew@naucse.UUCP (Bill Wilson)
Newsgroups: comp.periphs
Subject: Re: 8"DSDD-formatted 5"FDD?
Message-ID: <1154@naucse.UUCP>
Date: 8 Feb 89 15:28:25 GMT
References: <4271@psuvax1.cs.psu.edu>
Distribution: usa
Organization: Northern Arizona University, Flagstaff, AZ
Lines: 21

From article <4271@psuvax1.cs.psu.edu>, by soohong@gondor.cs.psu.edu (Soohong Kim):
> 
>     Hi. I need some pointers/advice on 8"DSDD floppy controllers and
> 5" High Density drives compatible with TEAC's FD55GFR (can rotate in
> **360 rpm** and handle 8" formats!).
>
You can try two companies: Flagstaff Engineering (602-774-5188) 
    talk to Gary McClellan if you can, and Micro Solutions (815-
    756-3411), Idon't have a contact there.

If you need some quick conversions done, I do them on the side for
$15 a disk for straight data transfers and a little higher if fancy
manipulations need to be done.  I would be glad to look at a disk
for you if you would like.  I also give discounts starting with 10 disks.


-- 
Bill Wilson                          (Bitnet: ucc2wew@nauvm)
Northern AZ Univ
Flagstaff, AZ 86011
{These views are mine and do not necessarily reflect those of my employer}