Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ukma!psuvm.bitnet!cunyvm!polygraf.bitnet!mspinner
From: MSPINNER@POLYGRAF.BITNET
Newsgroups: comp.sys.amiga
Subject: Re: Taking the plunge
Message-ID: <8510MSPINNER@POLYGRAF>
Date: 2 Feb 89 21:23:44 GMT
References: <7277@louie.udel.EDU> <5817@cbmvax.UUCP> <324@lakesys.UUCP>
Organization: Polytechnic University Computing Center
Lines: 17


  For all those interested in hooking up multiscan monitors to your
Amy-- NTSC composite signals -- it's easy.  Some cable companies sell
such a monster for $35, but I got it for $12... Originally, since
I am an Comp. Eng., I *hot* wired my I*M VGA card to the multiscan and
found out all about the RGB signals, so when I got my Amy - I tested
out the monitor output (I don't suggest this with your Amy or multiscan)
by sticking in loose wires.  Finally I got the right connections and then
I asked a friend about a real cable.  I have a Sony Multiscan and this cable
should work with (disclaimer) most multisync monitors with the same 9-pin
RGB configuration.  Such a monitor blows away the A1084!  Worth the bucks!

  Caio!

  Mitchell S. Spinner
  Undergrad at N.Y. Polytechnic U.
  MSPINNER@POLYGRAF