Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cwjcc!gatech!udel!mmdf
From: MFM1%LEHIGH.BITNET@ibm1.cc.lehigh.edu (mark masters)
Newsgroups: comp.sys.amiga
Subject: re:Port2 problems
Message-ID: <8183@louie.udel.EDU>
Date: 7 Feb 89 14:03:22 GMT
Sender: mmdf@udel.EDU
Lines: 7


The chip that is probably bad is a 74HCT157 or 74LS157.  It should be
located close to the port inputs.  The chip is soldered to the
mother-board, so if you want to get some one to desolder it for you I
wouldn't think that would be to expensive.  The chip costs about $00.19
good luck
Mark