Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!cwjcc!ukma!xanth!mcnc!ecsvax!dukeac!rsb
From: rsb@dukeac.UUCP (R. Scott Bartlett)
Newsgroups: comp.sys.amiga
Subject: Re: Adaptec ACB-4520 SCSI->ESDI (Query)
Keywords: ACB-5580 SCSI-SMD
Message-ID: <1222@dukeac.UUCP>
Date: 7 Feb 89 05:01:11 GMT
References: <15119@oberon.USC.EDU>
Reply-To: rsb@dukeac.UUCP (R. Scott Bartlett)
Organization: Center for Demographic Studies, Duke University, Durham, NC
Lines: 31

In article <15119@oberon.USC.EDU> papa@pollux.usc.edu (Marco Papa) writes:
 
>Has anybody been able to use an Adaptec ACB-4520 SCSI->ESDI controller
>with ANY Amiga SCSI controller for the A2000 (A2090, Supra, CLtd, GVP,
>HardFrame, StarBoard, etc...) ?
 
>Also, if such a controller exists, does it support both LUNs?
 
>Note that unlike the Adaptec ACB-4000 and ACB-4070, the ACB-4520 does not
>require a MODE SELECT command to be sent prior to formatting the drive.
 
>-- Marco Papa 'Doc'

For that matter, does anyone know if any of the above mentioned SCSI host
controllers work with the ACB-5580 SCSI<-->SMD controller?

						rsb

filler
	filler
		filler
			filler
				filler
					filler
						Are you full yet?

-- 
rsb@dukeac.ac.duke.edu		///	"Amigas do it with hardware."-- Me
rutgers!mcnc!ecsvax!dukeac!rsb ///     "Sycamore is open."-- Negativ Land
I'm a HORSE, of course.    \\\///     "I luv S&M!!!"   "No geeks here!!"
Disclaimer NOT included!    \XX/     "This space for rent"