Xref: utzoo comp.sys.amiga:29224 comp.sys.amiga.tech:3725
Path: utzoo!utgpu!utstat!jarvis.csri.toronto.edu!mailrus!ames!oliveb!amiga!cbmvax!daveb
From: daveb@cbmvax.UUCP (Dave Berezowski)
Newsgroups: comp.sys.amiga,comp.sys.amiga.tech
Subject: Re: Need Driver for Panasonic KX-P1124
Message-ID: <5960@cbmvax.UUCP>
Date: 13 Feb 89 14:57:20 GMT
References: <1931L30CC@CUNYVM>
Reply-To: daveb@cbmvax.UUCP (Dave Berezowski)
Organization: Commodore Technology, West Chester, PA
Lines: 22

In article <1931L30CC@CUNYVM> L30CC@CUNYVM.CUNY.EDU writes:
>
>
>I just got my hands on a brand new Panasonic KX-P1124 24 pin printer.  The
>manual states it is Epson LQ-2500 compatible so I've been using the EpsonQ
>printer driver in Workbench 1.3.  However, the printer is capable of printing
>in resolutions higher than those supported by the EpsonQ driver.  So I was
>wondering if anyone knows if a specific driver for the Panasonic has been
>written.  I also recall running across an ad about a year ago from a third
>party company that writes specific drivers for printers.  Anybody know of
>any such company?  Any info greatly appreciated...
>
	The only resolution mode that the EpsonQ driver does not support is
360x360 dpi graphics.  This is due to the fact that Epson did not have this
mode when the EpsonQ driver was written.

	The Nec_Pinwriter driver is IDENTICAL to the EpsonQ driver with the
exeception that it DOES have 360x360 dpi support.  So, use the Nec_Pinwriter
driver. :^)


	david berezowski