Path: utzoo!utgpu!utstat!jarvis.csri.toronto.edu!mailrus!ames!oliveb!amiga!cbmvax!jesup From: jesup@cbmvax.UUCP (Randell Jesup) Newsgroups: comp.sys.amiga Subject: Re: What I'd like to see in 1.4 Keywords: Icon remover Message-ID: <5961@cbmvax.UUCP> Date: 13 Feb 89 16:43:53 GMT References: Reply-To: jesup@cbmvax.UUCP (Randell Jesup) Organization: Commodore Technology, West Chester, PA Lines: 14 In article armhold@topaz.rutgers.edu (George Armhold) writes: >I'd like to see a menu item in Workbench 1.4 that lets you remove old >disk icons from the screen after you're done with them. I'm usually >stuck with a few lying around, cluttering up my screen even after the >disks have been removed from the drives a long time ago. They do go away. However, if you have a lock on them (cd'ed into the disk, in your path, and assign to the disk, or a program that leaves locks hanging (and loses 24 bytes per run)), then they will remain. Try sticking a disk in, opening it, close it, and remove the disk. The icon will go away after a couple of seconds. -- Randell Jesup, Commodore Engineering {uunet|rutgers|allegra}!cbmvax!jesup