Xref: utzoo comp.sys.amiga:29302 comp.sys.amiga.tech:3749 Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ulowell!cbmvax!higgin From: higgin@cbmvax.UUCP (Paul Higginbottom MKT) Newsgroups: comp.sys.amiga,comp.sys.amiga.tech Subject: Re: Need Driver for Panasonic KX-P1124 Message-ID: <5979@cbmvax.UUCP> Date: 14 Feb 89 22:08:17 GMT References: <1931L30CC@CUNYVM> Reply-To: higgin@cbmvax.UUCP (Paul Higginbottom MKT) Organization: Commodore Technology, West Chester, PA Lines: 34 In article <1931L30CC@CUNYVM> L30CC@CUNYVM.CUNY.EDU writes: $I just got my hands on a brand new Panasonic KX-P1124 24 pin printer. The $manual states it is Epson LQ-2500 compatible so I've been using the EpsonQ $printer driver in Workbench 1.3. However, the printer is capable of printing $in resolutions higher than those supported by the EpsonQ driver. So I was $wondering if anyone knows if a specific driver for the Panasonic has been $written. I've been waiting for an opportunity to talk about this printer! Some may recall I asked for any info people had on this printer (via email) and the response was great (thanks everyone). Basically everyone who wrote to me likes Panasonic printers. So I got the very same one you have (the KX-P1124). I think the printer is --in a word--: AMAZING. The printer: - prints graphics at up to 360x360 dpi. - can feed paper from the front, back, and underside. - takes single sheets without unloading the tractor paper. - allows tractor paper to be torn off without wasting a sheet. - prints in 5 different fonts (each at 4 or 5 different pitches). - emulates Epson LQ2500 & IBM ProPrinter. - prints at around 200 cps in draft, and 63 NLQ (twice as fast as 9 pin) - can be had for around $320 mail order! (What makes you think I like this puppy?) Anyway - to your specific question! Use the Nec Pinwriter driver. As far as I know, it's the same as the EpsonQ driver with more resolution modes. Paul. Disclaimer: the above opinions are my own and this message does not in any way represent an endorsement by my employer.