Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!csd4.milw.wisc.edu!bionet!agate!ucbvax!ICAEN.UIOWA.EDU!dbfunk From: dbfunk@ICAEN.UIOWA.EDU (David B. Funk) Newsgroups: comp.sys.apollo Subject: Re: want ``etherfind'' like utility Message-ID: <8902032058.AA01182@icaen.uiowa.edu> Date: 3 Feb 89 20:54:53 GMT Sender: daemon@ucbvax.BERKELEY.EDU Organization: Iowa Computer Aided Engineering Network, University of Iowa Lines: 26 WRT posting <763@neptune.AMD.COM> from Mark Luedtke > Where are the netlog & ringlog utilities? I refer back to my posting <8901310201.AA00952@icaen.uiowa.edu>: > The tools "netlog" & "ringlog", which are not documented in any manual, can be > used to monitor network traffic at the packet type level. Netmain will give > packet counts and some general indication of netork paging levels, ringlog > and netlog can analize the types of packets on the network and their sources. > They can be used to fine-tune a network by finding out what types of files > are accessed most often on a server, which nodes do the most paging, etc. >> Netlog & ringlog can be found in the directory "/systest/ssr_util" along <<** > with various help files. The directory "/systest" contains various systems level diagnostics & debugging tools. This directory contains several megabytes of stuff and its installation is optional. If you can't find "/systest" on your disk, check with your system administrator as to where a copy may be found. You may have to go to the distribution tape set, if it was never loaded. In my posting <8901310201.AA00952@icaen.uiowa.edu>, I refered to the wrong manual for information on the "jam_net" tool. The useage of that tool is mentioned in the manual "Managing Domain/OS and Domain Routing in an Internet". Dave Funk