Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cwjcc!tut.cis.ohio-state.edu!ucbvax!APPLE.COM!mjohnson
From: mjohnson@APPLE.COM (Mark Johnson)
Newsgroups: comp.sys.apple
Subject: Re: Complaints about APDA pricing
Message-ID: <8902021950.AA23315@apple.com>
Date: 2 Feb 89 19:50:44 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 27

If you tried to respond to Mark's message about sending mail to
APDA@APPLELINK.APPLE.COM and got "host unknown" (from BITNET) send the
message to XB.DAS@Stanford.BITNET with Subject: APDA@APPLELINK
----------------------------Original message----------------------------
Murph,
 I would appreciate it if you could post the following instructions to
comp.sys.mac and comp.sys.apple.  If you are on BITNET, but not the Internet,
you must use the DASNET gateway at Stanford.  Following are the instructions
on how to do that.  Thanks.

Sending to AppleLink from BITNET

1.    In the TO field, enter the DASNET address:  XB.DAS@STANFORD.BITNET
2.    In the SUBJECT field, enter the AppleLink Address followed by:
@APPLELINK

So it looks like this:
TO: XB.DAS@STANFORD.BITNET
SUBJECT: USER1@APPLELINK

3.    If you type a ! after the address in the subject field, you can
insert comments, but the subject line must be limited to 29 characters.

Example:
SUBJECT: USER1@APPLELINK!Test

Mark