Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!NIEHS.BITNET!ALBRO
From: ALBRO@NIEHS.BITNET
Newsgroups: comp.sys.apple
Subject: More nits
Message-ID: <8902040241.aa28560@SMOKE.BRL.MIL>
Date: 3 Feb 89 18:14:00 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 22

Murph Sewall <IN%SEWALL@UCONNVM.BITNET> writes:

>You CAN change serial drivers in ProDOS if you're willing to go to
>a little trouble.  Copy the driver from the DOS 3.3 disk and edit off
>the EXECKER385.INSTALL,R1 and END lines at the bottom (the last 2 lines).

>BLOAD KERMIT385
>EXEC KER385.driver (for SSC it's KER385.SS)
>BSAVE KERMIT385,A$2000,L$6E00

Close, but not quite.

If you do this, you should be interestingly surprised.  Old versions of
Kermit (<= 3.80) would have worked, but KER385 begins at $1000, not
$2000.  Replace the last line above with:

BSAVE KERMIT385,A$1000,L$6E00

and you'll have it.

Phil Albro
ALBRO@NIEHS.BITNET