Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!WPI.BITNET!GREYELF
From: GREYELF@WPI.BITNET
Newsgroups: comp.sys.apple
Subject: kermit
Message-ID: <8902070036.AA26474@wpi>
Date: 7 Feb 89 00:36:46 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The Internet
Lines: 36

To Kris Tenbarge:

Please use a header so we know where to reply to.

To dial out using Kermit using a Hayes Compatible Modem, just
type:

ATDT phone# (hit return and wait)    or
ATDP phone# (hit return and wait).

ATDT is for touch-tone phones, ATDP is for Pulse dialing.
Pulse will work either way, but tone only works if the touch tone
phone codes are accepted by the local area.

That is, if you can use a touch tone phone in your area, you can use the
touch tone option.

There's probably even a switch on your modem to determine touch or pulse
dialing.  In which case set it as you like, and only ATD phone# would
be necessary.

The command A/ (no return)  will resubmit the last modem command,
which is useful for redialing the same number.

Any of these commands can be used when connected, but not actual linked
to another computer.

Any more questions, you can reach me at:

+------------------------------------------------------------------+
|    Michael J Pender Jr         snail mail: Box 1942 c/o W.P.I.   |
|   Bitnet: greyelf@wpi.bitnet               100 Institute Rd.     |
| Internet: greyelf@wpi.wpi.edu              Worcester, Ma 01609   |
| User #20 at H.U.G.E. Bit Bucket                                  |
| Disclaimer:  Who me?  I was in Mexico buying drugs at the time!  |
+------------------------------------------------------------------+