Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!unmvax!pprg.unm.edu!hc!ames!amdcad!sun!pitstop!sundc!seismo!uunet!mcvax!inria!laas!ralph
From: ralph@laas.laas.fr (Ralph P. Sobek)
Newsgroups: comp.sys.atari.st
Subject: Re: Request info: 1040 RAM upgrades
Summary: What's their address?
Message-ID: <287@laas.laas.fr>
Date: 3 Feb 89 16:47:12 GMT
References: <480013@hpdml93.HP.COM> <1988Dec30.164348.29000@gpu.utcs.toronto.edu>
Organization: LAAS-CNRS Toulouse France
Lines: 29

In article <1988Dec30.164348.29000@gpu.utcs.toronto.edu>, lharris@gpu.utcs.toronto.edu (Leonard Harris) writes:
| The best upgrade board I have seen is made by Datafree in Toronto.
| It is a 4 layer board for noise immunity, fits inside 1040's and 520's
| and connects via a small plug in daughter card and a 16 point solder
| template.  It is VERY reliable and easy to install.
| It gives either 2.5 megs or 4 megs of memory depending how many
| 1 meg drams you install.
| I don't have an exact price but it is in the $200 range.
| Contact:  Datafree Inc.
| (416) 741-9825

Sounds pretty good, but I would appreciate some more info.  Could
someone either 1) e-mail me or post Datafree's mailing address, or 2)
give Datafree my mailing address (only for the guys in Toronto, of
course).  Thanks a lot.

Ralph P. Sobek                 | UUCP:  uunet!mcvax!inria!laas!ralph,    or
                               |        ralph@laas.uucp
LAAS-CNRS                      | Internet:  ralph@laas.laas.fr,    or
7, avenue du Colonel-Roche     |            ralph%laas.laas.fr@uunet.UU.NET
F-31077 Toulouse Cedex, FRANCE | ARPA:   sobek@eclair.Berkeley.EDU (forwarded\
+(33) 61-33-62-66              | BITNET/EARN:  SOBEK@FRMOP11        \ to UUCP )


-- 
Ralph P. Sobek			  Disclaimer: The above ruminations are my own.
ralph@laas.laas.fr			   Addresses are ordered by importance.
ralph@laas.uucp, or ...!uunet!mcvax!laas!ralph		If all else fails, try:
SOBEK@FRMOP11.BITNET				      sobek@eclair.Berkeley.EDU