Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!csd4.milw.wisc.edu!uwmcsd1!lakesys!rich
From: rich@lakesys.UUCP (Richard Dankert)
Newsgroups: comp.sys.atari.st
Subject: Re: HELP! needed with 520STFM RAM Upgrade
Keywords: Atari 520ST RAM expansion
Message-ID: <353@lakesys.UUCP>
Date: 6 Feb 89 06:05:51 GMT
References: <411@oblio.UUCP>
Reply-To: rich@lakesys.UUCP (Richard Dankert)
Distribution: na
Organization: Lake Systems - Milwaukee, Wisconsin
Lines: 38

In article <411@oblio.UUCP> charlie@oblio.UUCP (Charlie Richardson) writes:

	Stuff abouT machine deleted

>and skill in desoldering wave-soldered component holes), 
>Any information, comments, or pointers would be sincerely appreciated.


	Here's a tip to make all that work alot easier. Instead of 
`de-soldering' all them holes and possible damage to the PCB. go out 
and purchase a WAHL re-chargable soldering pen, and the drill that goes 
along with it. Get small bits for the drill, and drill the solder out of the
holes. Takes alot less time and effort, and soldering chips/sockets are alot
easier too, Believe me, I know, i'v done it !

>
>
>Thanks in advance,
>

	No problem.....

>
>
>================================================================================
>Charlie Richardson
>Acer Counterpoint, Inc.
>Voice: (800) 272-8255  (408) 434-0190
>UUCP: {daisy, hplabs}!oblio!charlie
>
>================================================================================





	rich.....
	UUCP: rich@lakesys.lakesys.COM     {always .... }