Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cornell!uw-beaver!mit-eddie!rutgers!njin!princeton!njsmu!mccc!shevett
From: shevett@mccc.UUCP (Dave Shevett)
Newsgroups: comp.sys.att
Subject: Re: set 7300 modem to auto-answer
Message-ID: <604@mccc.UUCP>
Date: 8 Feb 89 22:27:07 GMT
References: <859@ncr-sd.SanDiego.NCR.COM>
Reply-To: shevett@mccc.UUCP (Dave Shevett)
Distribution: usa
Organization: The College On The Other Side of U. S. Route 1
Lines: 22

In article <859@ncr-sd.SanDiego.NCR.COM> kit@falstaf.SanDiego.NCR.COM (Kit Chow, x3039) writes:
>
>Can anyone tell me how I can set the internal modem on the 7300
>to auto-answer?
>

The internal modem on the 7300 is controlled via the 'install' ua menu, 
under 'Administration', 'Hardware setup', 'Telephone setup' (menus in that
order).  The kicker is you have to tell the system you have a phone line
plugged into the second phone port, and you are using it for 'data'
communications (even if you want to use it for voice calls occasionally).
If you have the phone manager running, and make this change, you'll see the
top line change from VOICE2: IDLE to DATA or something like that.  Log out
and the system should happily start a getty (or uugetty) on the port.


+----------------------------------------------------------------+
| Dave Shevett   ~----------------------~    Labyrinth II BBS    |
| W. Trenton, NJ | Have you made your   | ...!mccc!labii!shevett |
| (609) 883-9352 | saving throw today?  |  --------------------  |
|   1200/2400    ~----------------------~ 3b1ish and proud of it |
+----------------------------------------------------------------+