Path: utzoo!utgpu!utstat!jarvis.csri.toronto.edu!mailrus!ames!amdcad!sun!pitstop!sundc!seismo!uunet!mcvax!hp4nl!shapetc!wilson
From: wilson@shapetc.UUCP (Tony Wilson )
Newsgroups: comp.sys.ibm.pc
Subject: Re: DESQview - who makes it?
Summary: DESQview 2.2 is now available
Message-ID: <342@shapetc.UUCP>
Date: 9 Feb 89 10:48:05 GMT
References: <3328@kuhub.cc.ukans.edu>
Organization: SHAPE Technical Centre, The Hague, Netherlands
Lines: 13

In article <3328@kuhub.cc.ukans.edu>, optical@kuhub.cc.ukans.edu writes:
> 
> The latest version of DESQview is 2.02, and it is available in either
> 5.25" 360K or 3.5" 720K diskette format.
> 
According to a flier included with QEMM-386 version 4.2, there is now
a DESQview version 2.2 available.  I would type in the features, but they 
run to nearly four sides of small print.

----------------------------------------------------------------------------
Tony Wilson                                      wilson@issun3.stc.nl,  or
SHAPE Technical Centre, The Hague, NL            ...!hp4nl!shapetc!wilson
----------------------------------------------------------------------------