Path: utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!rutgers!uwvax!astroatc!nicmad!brown
From: brown@nicmad.UUCP (Vidiot)
Newsgroups: comp.sys.ibm.pc
Subject: Re: AST Six-Pac Settings Needed
Keywords: AST Six pac
Message-ID: <3691@nicmad.UUCP>
Date: 11 Feb 89 20:10:45 GMT
References: <11124@umn-cs.CS.UMN.EDU>
Reply-To: brown@nicmad.UUCP (Vidiot)
Distribution: usa
Organization: Vidiot's Hangout
Lines: 18

In article <11124@umn-cs.CS.UMN.EDU> jkennedy@umn-cs.CS.UMN.EDU (Joel Kennedy) writes:
<The saga of the lost AST Six-pac documentation continues...
<Could some kind soul fill me in on what I have to do to
<this thing to make it run with no memory on board?  I
<have purchased another board that requires that I have
<no additional memory.  In other words I want to use it as
<just a clock/i-o board, no ems.  I suspect pulling out the
<ram would do it, but are there any other jumpers/switches
<to set?  Thanks very much.  Joel K.

Six-Pak Plus: Switch 1, positions 4-6 to OFF

Six-Pak Premium: Switch 2, positions 7-8 to ON
-- 
	       harvard-\	 att--\
Vidiot            ucbvax!uwvax!astroatc!nicmad!brown
	       rutgers-/      decvax--/
	ARPA/INTERNET: nicmad!brown%astroatc.UUCP@spool.cs.wisc.edu